Skip to content
Melbourne Water Restoration Pros

Melbourne Fire & Smoke Damage Restoration Residential & Commercial

Fire & Smoke Damage Restoration in Melbourne, FL

Melbourne Water Restoration Pros provides professional fire & smoke damage restoration in Melbourne, FL for residential and commercial properties across the Space Coast. Central Florida sits in the most lightning-prone corridor in the country, and the attic is where it lands. A strike that finds a gable vent, a plumbing vent or a roof-mounted antenna starts the fire above the ceiling, in the same assembly a roof leak would use.

Then the fire department puts water into it. By the time the truck leaves you have a fire loss and a water loss stacked in one place: charred rafters, soaked blown insulation, a ceiling that has taken hundreds of gallons from above, and smoke everywhere the attic breathes.

So the sequence runs both jobs at once. The structure gets stabilised and the roof opening gets tarped. Extraction and drying start immediately, because wet char grows mold as happily as wet drywall does. Soot cleanup waits until the assembly is stable enough to work inside safely.

Smoke behaves according to what burned. Protein smoke off a kitchen fire leaves a thin varnish that laughs at ordinary detergent and needs a solvent. A wiring or plastics fire leaves acidic residue that etches metal and glass within days, so appliance faces, window frames and fixtures get treated early rather than last.

Odour is the final stage and it is not a candle. Sealing cleaned framing, replacing the insulation the smoke lived in, and running a hydroxyl or ozone treatment in an unoccupied house is what actually ends it. Anything promising to remove smoke odour without removing the material holding it is a rental fee.

Contents get separated early on a fire job and the sorting is unforgiving. Porous items that held smoke — mattresses, pillows, open food, cosmetics — go out. Hard goods, framed art and metal get cleaned. Electronics that took soot go to a specialist rather than a rag, because the residue is conductive and the damage carries on long after the fire is out.

Our licensed and insured team brings the right materials and equipment to every job — neoprene pipe boots, OSB and plywood roof sheathing, blown fiberglass and cellulose attic insulation, self-adhered secondary water barrier, ridge and off-ridge vent flashing, penetrating pin moisture meters — and backs the work with a written workmanship warranty. We serve Melbourne and nearby communities including Palm Bay, West Melbourne, Melbourne Beach, Indialantic.

What We Handle

Everything our fire & smoke damage restoration in Melbourne covers

One crew, one point of contact, and the full range of fire & smoke damage restoration work in Melbourne, FL. If it is on this list we do it in house rather than handing it to a subcontractor:

  • fire damage restoration Melbourne FL
  • smoke damage cleanup Brevard
  • lightning strike fire damage
  • soot removal Melbourne
  • attic fire cleanup
  • odor removal after fire
  • hydroxyl treatment smoke
  • protein smoke cleanup
  • fire and water damage combined
  • board up after fire Melbourne
  • contents cleaning after fire
  • kitchen fire cleanup Melbourne

Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Melbourne services.

Materials, equipment and how we do fire & smoke damage restoration

The difference between fire & smoke damage restoration that lasts and fire & smoke damage restoration that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with neoprene pipe boots, OSB and plywood roof sheathing, blown fiberglass and cellulose attic insulation, self-adhered secondary water barrier, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.

Every Melbourne job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of water damage work in the Space Coast means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.

Where we do fire & smoke damage restoration outside Melbourne

Melbourne Water Restoration Pros covers Melbourne and the surrounding communities of the Space Coast. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.

Start on the Melbourne Water Restoration Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.

Why Melbourne Chooses Melbourne Water Restoration Pros

  • We trace the actual entry point before anyone opens a ceiling
  • Attic assemblies dried under negative pressure, not just the room below
  • Emergency dry-in with battened, screw-fastened tarps rather than sandbags
  • Moisture readings logged by room and handed to you every day

The standards behind fire & smoke damage restoration

Quality here is not a matter of opinion — it is written down. The fire & smoke damage restoration work we do in Melbourne follows published industry standards: IICRC publishes the S500 water-damage restoration standard, and EPA mold cleanup guidance sets the remediation thresholds and containment practice. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every fire & smoke damage restoration project in Melbourne gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free fire & smoke damage restoration free estimate in Melbourne, or request a quote and we'll get right back to you.

Related Services

Fire & Smoke Damage Restoration in Melbourne: Common Questions

How much does fire & smoke damage restoration cost in Melbourne, FL?

It comes down to square footage, access, the condition of what is already there, and the materials you choose — neoprene pipe boots, OSB and plywood roof sheathing, blown fiberglass and cellulose attic insulation. We do not price a job off a phone call and a guess. We measure on site and hand you an itemized free estimate with the scope written out, so you can compare it line by line against anyone else's number.

How long does a fire & smoke damage restoration job take?

Most residential fire & smoke damage restoration work in Melbourne runs from a single day to about a week once materials are on site. Larger commercial jobs get phased so the property keeps operating. Weather, permit review and material lead times are the usual reasons a date moves, and you hear about those from us before the crew starts, not after.

Do you pull permits and handle inspections in Melbourne?

Yes, on any work that needs one. We file with the Melbourne building department, schedule the inspection and stay on site for it. Skipping a permit is how property owners end up paying twice — once for the work, and again when it fails at resale or an insurance claim.

Is Melbourne Water Restoration Pros licensed and insured?

IICRC-certified water damage restoration firm. Licensed, insured and bonded in Florida. Work performed to the IICRC S500 and S520 standards of care. Every fire & smoke damage restoration job carries Written workmanship warranty on drying and reconstruction. Ask any contractor for those four things in writing before you sign — the ones who hesitate are telling you something.

Do you take commercial water damage work as well as residential?

Both. Melbourne Water Restoration Pros runs residential fire & smoke damage restoration across Melbourne neighborhoods and commercial work for offices, retail, restaurants, apartment complexes and HOA properties throughout the Space Coast. Commercial jobs get phased scheduling and off-hours crews so tenants and customers are not shut out while the work happens.

Call Now